Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E5470 Owner's Manual

PDF

Installing the system board

  1. Align the system board with the screw holders on the computer.
  2. Tighten the screws to secure the system board to the computer.
  3. Connect the speaker cable to its connector on the system and route the cable through its routing channels.
  4. Connect the speaker, power connector and coin cell battery cables to the connectors on the system board:
  5. Install the:
    1. power connector port

    2. WLAN

    3. heat sink assembly

    4. WWAN

    5. dock frame

    6. hard drive assembly or M.2 SSD or PCIe SSD
    7. keyboard

    8. memory module

    9. battery

    10. base cover

  6. Follow the procedure in After working inside your computer .

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\