Skip to main content
Contact Us

Dell 14 Plus DB14250 Owner's Manual

PDF

Installing the wireless card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.

Figure 1. Installing the wireless card
Image: Installing the wireless card

Steps

  1. Align the notch on the wireless card with the tab on the M.2 wireless-card slot (WLAN) on the system board.
  2. Slide the wireless card into the wireless-card slot (WLAN) on the system board.
  3. Connect the antenna cables to the wireless card.
    Table 1. Antenna-cable color schemeThe following table provides the antenna-cable color scheme for the wireless card of your computer.
    Connector on the wireless card Antenna-cable color Silkscreen marking
    Main White MAIN △ (white triangle)
    Auxiliary Black AUX ▲ (black triangle)
  4. Place the wireless-card bracket on the wireless card.
  5. Align the screw hole on the wireless-card bracket with the screw mount on the system board.
  6. Replace the screw (M2x3) that secures the wireless-card bracket to the system board.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\