Dell OptiPlex 7020 Small Form Factor Owner's Manual

PDF

Power LED Diagnostics

The power button LED located on the front of the chassis also functions as a bicolored diagnostic LED. The diagnostic LED is only active and visible during the POST process. Once the operating system starts to load, it is no longer visible.

Amber LED blinking scheme – The pattern is 2 or 3 blinks followed by a short pause then x number of blinks up to 7. The repeated pattern has a long pause inserted in the middle. For example 2,3 = 2 amber blinks, short pause, 3 amber blinks followed by long pause then repeats.

Table 1. Power LED Diagnostics
Amber LED State White LED State Description
off off system is OFF
off blinking system is in sleep state
blinking off power supply unit (PSU) failure
steady off PSU is working but failed to fetch code
off steady system is ON
Amber LED State
Description
2,1
system board failure
2,2
system board, PSU or PSU cabling failure
2,3
system board, memory or CPU failure
2, 4
coin-cell battery failure
2,5
corrupt BIOS
2,6
CPU configuration failure or CPU failure
2,7
memory modules are detected, but a memory failure
3,1
possible peripheral card or system board failure
3,2
possible USB failure
3,3
no memory modules are detected
3,4
possible system board error
3,5
memory modules are detected, but a memory configuration or compatibility error
3,6
possible system board resource and/or hardware failure
3,7
some other failure with messages on screen

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\