Dell Precision 7530 Service Manual

Removing the M.2 Solid State Drive—SSD module

1. Follow the procedures in Before working inside your computer.
2. Remove the:
   1. SD card
   2. base cover
   3. battery
3. To remove the M.2 SSD module (Slot 4):
   1. Remove the single (M2.0x3.0) screw that secures the thermal plate to the system [1].
   2. Slide and remove the thermal plate [2].
   3. Remove the single (M2.0x3.0) screw that secures the M.2 SSD to the system board [3].
   4. Remove the M.2 SSD from the system [4].
      NOTE:Repeat the above steps for removal of other M.2 SSD installed (Slot 3 and 5).