Alienware Command Center 5.x User's Guide

Create overclock profiles

1. Under the FUSION tab, click to create an overclock profile.
2. In the Overclock Profiles section, click NEW PROFILE and enter the profile name.
3. Set the CPU, GPU, and memory settings from the right pane.
4. Click the ADVANCED VIEW tab next to the CPU OVERVIEW tab, to change the following settings:
   • Frequency
   • Voltage
   • Voltage Offset

   NOTE:The settings in the ADVANCED VIEW tab can differ depending on your computer and CPU type.
5. Click the ADVANCED VIEW tab next to the GPU OVERVIEW tab, to change the following settings:
   • Power Limit %
   • Thermal Limit
   • Core Clock
   • Memory Clock

   NOTE:The settings in the ADVANCED VIEW tab can differ depending on your computer and GPU type.
6. Click the ADVANCED VIEW tab next to the MEMORY OVERVIEW tab, and then select the RAM for overclocking.
7. Click TEST & SAVE.
   A pop-up window appears and begins testing the profile's settings. After testing the overclock profile, the test result is displayed.
8. Click SAVE if the test is successful.
   The overclock profile is saved and the saved profile is displayed in the overclock profile list. If the test is not successful, a dialog box is displayed, prompting you to confirm the recommended settings by Alienware Command Center.
9. Click Yes.
   The recommended settings are displayed under the ADVANCED VIEW tab.
10. Click SAVE to save the recommended settings.
11. Select the box next to the name of the overclock profile to select and activate the particular profile.
    To duplicate an overclock profile, you can right-click the name of the profile, and select DUPLICATE.

    NOTE:You can click REVERT from the ADVANCED VIEW tab to revert the overclock settings to previously saved settings.