Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1 PB14250/PB14250 2-in-1 (Intel Core Ultra 200V Series) Owner's Manual

Power adapter

The following table lists the power adapter specifications of your Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1.

Table 1. Power-adapter specifications

The following table provides the detailed power adapter specifications of Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1.

Description Option one Option two Option three
Type

60 W adapter, USB-C

65 W adapter, USB-C

100 W adapter, USB-C

Power-adapter dimensions:
Height

22 mm (0.87 in.)

28 mm (1.1 in.)

26.5 mm (1.04 in.)

Width

55 mm (2.16 in.)

51 mm (2.01 in.)

60 mm (2.36 in.)

Depth

66 mm (2.60 in.)

112 mm (4.41 in.)

122 mm (4.80 in.)

Input voltage

100 to 240 VAC

100 to 240 VAC

100 to 240 VAC

Input frequency

50 Hz to 60 Hz

50 to 60 Hz

50 to 60 Hz

Input current (maximum)

1.70 A

1.70 A

1.70 A

Output current (continuous)
  • 20 V/3 A (continuous)
  • 15 V/3 A (continuous)
  • 9.0 V/3 A (continuous)
  • 5.0 V/3 A (continuous)
  • 20V/3.25A (continuous)
  • 15V/3A (continuous)
  • 9.0V/3A (continuous)
  • 5.0V/3A (continuous)
  • 20 V/5 A (continuous)
  • 15 V/3 A (continuous)
  • 9.0 V/3 A (continuous)
  • 5.0 V/3 A (continuous)
Rated output voltage

20 VDC/15 VDC/9 VDC/5 VDC

20 VDC/15 VDC/9 VDC/5 VDC

20 VDC/15 VDC/9 VDC/5 VDC

Temperature range:
Operating

0°C to 40°C (32°F to 104°F)

0°C to 40°C (32°F to 104°F)

0°C to 35°C (32°F to 95°F)

Storage

-20°C to 70°C (-4°F to 158°F)

-40°C to 70°C (-40°F to 158°F)

-40°C to 70°C (-40°F to 158°F)

CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\