Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1 PB14250/PB14250 2-in-1 (Intel Core Ultra 200V Series) Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary depending on the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1.
Component	Screw type	Quantity	Screw image
Base cover	Captive	8
Battery	Captive	4
WWAN shielding cover	M2x4	3
Solid state drive shielding cover	M2x4	2
Speakers	M1.6x1.5	6
Fan	M2x4	2
Heatsink	Captive	4
Display cable bracket	M2x3	2
Display assembly	M2.5x4	4
Display assembly	M2x3	1
Display panel	M1.6x1.4	4
Display hinge cap and hinge assembly	M2x3	2
Display hinge cap and hinge assembly	M2.5x3.5	4
MIPI camera	M1.6x1.4	2
Power button	M1.6x1.7	2
Smart card reader	M2x2	4
USH board	M1.6x1.5	2
WLAN bracket	M2x3	1
System board	M2x3	4
System board	M2x4	3 NOTE:Applicable for computers shipped with a WWAN card. 2 NOTE:Applicable for computers shipped without a WWAN card.
I/O board	M2x3	5
USB C connector module	M2x5	3
Keyboard assembly	M1.6x1.7	20