Dell Latitude 3500 Service Manual

Installing the system board

Steps

  1. Align the screw hole on the system board with the screw hole on the palmrest and keyboard assembly [1].
  2. Replace the two (M2x3) and two (M2x2) screws that secure the system board to the palmrest and keyboard assembly [2].
    Installing the system board
  3. Connect the following cables to the system board:
    1. DC-in [1, 2].
    2. Speaker [3].
      Installing the system board
  4. Connect the following cables to the system board:
    1. Power button board [1].
    2. Fingerprint reader (optional) [2].
    3. IO board [3].
    4. HDD [4].
    5. Touchpad [5].
    6. Keyboard [6].
      Installing the system board

Next steps

  1. Replace the display assembly.
  2. Replace the heatsink.
  3. Replace the system fan.
  4. Replace the SSD.
  5. Replace the Memory.
  6. Replace the WLAN.
  7. Replace the battery.
  8. Replace the base cover.
  9. Replace the SD memory card.
  10. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\