Dell Latitude 3500 Service Manual

Removing the M.2 2280 Solid-state drive or Intel Optane memory—Optional

Prerequisites

NOTE: Disable the Intel Optane memory before removing the Intel Optane memory module from your computer. For more information about disabling the Intel Optane memory, see disabling Intel Optane memory

  1. Follow the procedure in before working inside your computer
  2. Remove the SD memory card
  3. Remove the base cover
  4. Disconnect the battery cable.

Steps

  1. Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [1].
  2. Turn the thermal plate over [2].
  3. Slide and remove the thermal plate from the solid-state drive/Intel Optane card slot [3].
    Removing the M.2 card
  4. Remove the single (M2x2) screw that secures the solid-state drive/Intel Optane card to the palmrest and keyboard assembly [1].
  5. Slide and lift the solid-state drive/Intel Optane card off the palmrest and keyboard assembly [2].
    Removing the M.2 card

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\