Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E7450 Owner's Manual

Removing the Display Panel

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove:
    1. battery

    2. display bezel

  3. Perform the following steps as shown in the illustration:
    1. Remove the screws that secure the display panel to the display assembly [1].
    2. Lift the display panel to access the eDP cable [2].
    Figure displaying removing the screws that secure the display pane to the computer
  4. Peel the adhesive tape [1] to access the eDP cable [2].Figure displaying peeling the connector tape..
  5. Perform the following steps as shown in the illustration:
    1. Disconnect the eDP cable from its connector on the display assembly [2].
    2. Remove the display panel from the display assembly [3].Figure displaying removing the display panel.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\