iDRAC8 with Lifecycle Controller Version 2.70.70.70 Redfish API Guide

PDF

Volume — Instance

Description

Volume instance represent the properties used to describe a volume. The volume can be a virtual disk or other logical storage entities as presented to the operating system.

NOTE The DELETE operation on an instance of Volume is supported only on RAID, software RAID, and BOSS controllers.

URL

/redfish/v1/Systems/System.Embedded.1/Storage/<StorageController-Id>/Volumes/<Volume-Id>

/redfish/v1/Systems/System.Embedded.1/Storage/<StorageController-Id>/Volumes/<Volume-Id>/Settings

HTTP methods and privileges

Table 1. HTTP methods and privileges for the instance of VolumeThis table provides details about the supported HTTP methods and privileges for the instance of the resource.
HTTP method	Required privilege
GET	Login
PATCH	Login + SystemControl
DELETE	Login + SystemControl

Required parameters

Table 2. Required parametersThis table provides details about the parameters required by the resource.
Parameter	Description
Encrypted	Whether the volume is encrypted.
@Redfish.SettingsApplyTime	Defines when the settings are applied. This is supported on the Settings URL. — Optional

Status codes

Table 3. Status codesThis table provides details about the HTTP status codes returned.
HTTP status code	Extended information	Error message code
200
202
400	Base.1.0.PropertyValueTypeError Base.1.0.PropertyUnknown
403	Base.1.0.InsufficientPrivilege	RAC0506
405	Base.1.0.GeneralError	SYS402
500	Base.1.0.InternalError