Dell Technologies 14th Generation PowerEdge Server Troubleshooting Guide

OpenManage Essentials does not recognize the server

1. Launch OpenManage Essentials.
2. Navigate to Manage > Discovery and Inventory.
3. In the left panel, click Add Discovery Range.
4. Enter the IP address of the specific client device or the IP range having all the client devices with the subnet mask details.
5. Click Next.
6. In the ICMP Configuration page, click Next.
7. Protocol Selection

   From Dell Command | Monitor 9.0 onwards, both SNMP and WMI protocols are supported for discovery and inventory. Select the required protocols (only SNMP or only WMI or both SNMP and WMI) and enter the required information.

   It is recommended to use WMI protocol for discovery and inventory. The difference of inventory information fetched using WMI versus SNMP protocol is specified. Fetching of hardware logs is possible only using WMI protocol.

   • For discovery and inventory through SNMP protocol, set the community strings in SNMP Configuration page.
   • To disable SNMP discovery uncheck the Enable SNMP discovery.
   • For discovery and inventory through WMI protocol, click Next, otherwise click Finish.
   • In the WMI configuration page, select Enable WMI discovery. Provide the WMI credentials of remote device.
   • Click Finish.