Dell Lifecycle Controller GUI v2.70.70.70 User's Guide

PDF

Configuring iDRAC Network and Credentials

Use this page to configure remote access parameters for iDRAC.

  1. From the IP Address Source menu, select one of the following options:
    • Static — indicates that the network must be configured by using a static IP. Type the IP Address Properties such as IP Address, Subnet Mask, Default Gateway, DNS Address Source, and DNS Address. If you do not have this information, contact your network administrator.
    • DHCP — Indicates that the network must be configured by using an IP address from a DHCP server. If DHCP is selected, a DHCP IP address is displayed on the Network Settings page.
  2. Enter the following credentials:
    • Account Username— The user name to access iDRAC network
    • Password— The password to access iDRAC network
    • Confirm Password— The password to access iDRAC network
  3. Click Next

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\