Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Precision 5820 Tower Owner's Manual

Removing the NVMe Flexbay

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. side cover
      NOTE:Do not remove the side cover, if the front I/O bezel is unlocked.
    2. HDD bezel
  3. To remove the NVMe flexbay :
    1. Press the release button [1] to unlock the latch [2].
      Displays the HDD bracket
    2. Pull the latch to slide the carrier out of the HDD slot.
      Pull the Flexbay out
  4. To remove the SSD carrier from the NVMe flexbay:
    1. Press the release button to slide the M.2 SSD carrier out of the NVMe flexbay.
      Press the release latch
    2. Pull the M.2 SSD carrier out of the NVMe flexbay.
      Pull the SSD out
  5. To remove the SSD from the SSD carrier:
    1. Remove the screws on either side of the SSD.
      Remove the screw
    2. Remove the screw from the top of the SSD carrier.
      Remove the central screw
    3. Slide the SSD cover from the top of the carrier.
      remove the cover
    4. Slide the SSD out of the M.2 slot on the carrier.
      Remove the SSD
      NOTE:For more information on detailed parts requirement in upgrade scenarios refer to, KB Article Number: 000185631 and 000146243.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\