XPS 8940 Service Manual

PDF

Installing the memory modules

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the memory modules and provide a visual representation of the installation procedure.

Image: Installing the memory modules

Steps

  1. Align the notch on the memory module with the tab on the memory-module slot.
  2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip locks in place.
    CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.
    NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and reinstall it.
    NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the slot.

Next steps

  1. Install the left-side cover.
  2. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\