XPS 8940 Service Manual

PDF

Removing the processor

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the left-side cover.
  3. Remove the processor fan and heat-sink assembly.
NOTE: The processor might still be hot after the computer is shut down. Allow the processor to cool down before removing it.

About this task

The following images indicate the location of the processor and provide a visual representation of the removal procedure.

Image: Removing the processor

Steps

  1. Press the release lever down and then push it away from the processor to release it from the securing tab.
  2. Extend the release lever completely and open the processor cover.
    CAUTION: When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.
  3. Gently lift the processor from the processor socket.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\