Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell APEX Cloud Platform MC-760 Hardware Requirements and Specifications

Run the Embedded System Diagnostics from Boot Manager

Run the Embedded System Diagnostics (ePSA) if your system does not boot.


  1. During the boot process, press F11.
  2. Use the up and down arrow keys to select System Utilities, and then Launch Diagnostics.
    Figure 1. System Utilities and Launch Diagnostics options in Boot Manager
    This image shows Boot manager optionsThis image shows Boot manager options
    The Quick tests begin.
  3. Alternatively, during the system boot process, press F10 and select Hardware Diagnostics, and then Run Hardware Diagnostics.
    The ePSA Pre-boot System Assessment window displays, lists all the devices that are detected, and runs the diagnostic test on the detected devices.
  4. After the testing is complete, click Results, System Health, Configuration, and then the Event Log tabs to review the results.
  5. Once you have reviewed the information, close the Embedded System Diagnostics utility by selecting the Exit option in the upper right corner.
  6. Select OK to close the Embedded System Diagnostics utility.

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\