Dell Command | Configure Version 4.12.0 User's Guide

PDF

Boot order screen

The following table displays the available options on the Dell Command | Configure - Boot Order screen.

Table 1. Options on the boot order screenOptions on the boot order screen
Options	Description
Active Boot List	You can configure or modify the Active Boot List for UEFI or Legacy based on the requirement. If the active boot list is ON, and then the system boots with UEFI or Legacy based on the boot order type. NOTE:In Local System Package, you cannot modify Active Boot List if the system supports only UEFI.
Device Type	Displays the type of device.
Device Instance	Displays a unique number to identify the device on the system.
Shortform	Displays the short form of the device name. If the system has many devices of the same device type, and then the short form of the device is displayed with a .<number> notation. For example, if the system has an internal hard drive, eSATA HDD, and eSATA Dock HDD, and then the short forms are displayed as hdd.1, hdd.2, and hdd.3 respectively.
Description	Displays a short description for the device.
Status	Displays if the device is turned on or off.
Delete	Removes the device from the boot order. Click X to remove a device. NOTE:You can view this option if the boot order screen is in Edit mode.