Dell DD and PowerProtect Hardware 8.0 Features and Specifications

PDF

DS60 front panel

DS60 Front Panel — Figure 1. DS60 front panel

NOTE:The front LEDs are identified inside the red rectangle.

If there is a problem with the enclosure, the enclosure fault light LED (marked with a triangle with an exclamation mark) is amber. When the shelf is powered on and active, the disk enclosure power LED (marked with a circle with a vertical line) is blue.

Table 1. LED status lights
Light	Quantity	Color	Meaning
Disk Enclosure Power	1	Blue	Power to enclosure is on.
Disk Enclosure Fault	1	Amber	On when any fault condition exists; if the fault is not obvious from a disk or fan module light, look at the back of the disk enclosure.

NOTE:The individual disk LEDs are only visible when the disk enclosure is opened to verify the disks inside.

For part replacement information, refer to the DS60 Expansion Shelf Installation and FRU Replacement Guide.