Dell DD and PowerProtect Hardware 8.0 Features and Specifications

PDF

FS15 hardware specifications

NOTE:All ratings assume a fully configured FS15.
Table 1. FS15 hardware specificationsFS15 hardware specifications
Specification Description
AC line voltage 100 to 240 Vac ± 10%, single-phase, 47 to 63 Hz
AC line current (operating maximum) 2.8 A max at 100 Vac, 1.4 A max at 200 Vac
Power consumption (operating maximum) 280 VA (235 W) max
Power factor 0.98 min at full load, low voltage
Heat dissipation (operating maximum) 8.46 x 105 J/hr, (800 Btu/hr) max
Dimensions (rack mounted, with bezel)
  • Width: 17.62" (45 cm) Depth: 14” (35.56cm)
  • Height: 5.25” (13.34cm) 3 RU
Maximum Weight 68 lbs (30.8 kg)
Operating Temperature
  • Ambient temperature: 10o C to 35o C (50o F to 95o F)
  • Temperature gradient: 10o C/hr (18o F/hr)
  • Relative humidity extremes: 20% to 80% noncondensing
Recommended Operating Relative Humidity 40% to 55% noncondensing
Non-Operating Temperature
  • Ambient temperature: -40o C to 65o C (-40o F to 149o F)
  • Temperature gradient: 25o C/hr (45oF/hr)
  • Relative humidity: 10% to 90% noncondensing

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\