Dell DD and PowerProtect Hardware 8.0 Features and Specifications

PDF

Rack system safety

Follow these safety guidelines to protect against personal injury or damage to the equipment.

  • Do not use rack-mounted equipment as a shelf or workspace.
  • Do not add weight to rack-mounted equipment.
  • When installing multiple enclosures in a rack, fill the rack from the bottom up and empty the rack from the top down.
  • Deploy the anti-tilt bar on the rack to prevent the rack from tipping during equipment installation.
  • Ensure that all cables are installed and removed safely. Unplug the cables before moving the equipment.
  • Insert and unplug cables in a horizontal orientation. Do not drag or apply excessive force, which may damage the cables, connectors, and the motherboard.
WARNING:The storage enclosure is heavy. To reduce the risk of personal injury or damage to the equipment:
  • Observe local occupational health and safety requirements and guidelines for manual material handling.
  • Get help to lift and stabilize the enclosure during installation or removal, especially when the product is not fastened to the rails. When the enclosure weighs more than 22.5 kg (50 lb), at least two people must lift the enclosure into the rack together. A third person may be required to help align the enclosure if it is installed higher than chest level.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\