Dell DD and PowerProtect Hardware 8.0 Features and Specifications
Rear panel
| Item | Panels, ports, and slots | Description |
|---|---|---|
| 1 | Full-height PCIe expansion card slot (3) | The PCIe expansion card slot (riser 1) connects up to three full-height PCIe expansion cards to the system. |
| 2 | Half-height PCIe expansion card slot | The PCIe expansion card slot (riser 2) connects one half-height PCIe expansion cards to the system. |
| 3 | Rear handle | The rear handle can be removed to enable any external cabling of PCIe cards that are installed in the PCIe expansion card slot 6. |
| 4 | Full-height PCIe expansion card slot (2) | The PCIe expansion card slot (riser 2) connects up to two full-height PCIe expansion cards to the system. |
| 5 | Full-height PCIe expansion card slot (2) | The PCIe expansion card slot (riser 3) connects up to two full-height PCIe expansion cards to the system. |
| 6 | Power supply unit (2) | Supports two AC power supply units (PSUs) |
| 7 | NIC ports | The NIC ports that are integrated on the network daughter card (NDC) provide network connectivity. |
| 8 | USB port (2) | The USB ports are 9-pin and 3.0-compliant. These ports enable you to connect USB devices to the system. |
| 9 | VGA port | Enables you to connect a display device to the system. |
| 10 | Serial port | Enables you to connect a serial device to the system. |
| 11 | iDRAC9 dedicated port | Enables you to remotely access iDRAC. |
| 12 | System identification button | The System Identification (ID) button is available on the front and back of the systems. Press the button to identify a system in a rack by turning on the system ID button. You can also use the system ID button to reset iDRAC and to access BIOS using the step through mode. |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\