Dell EMC OpenManage Enterprise Version 3.1 User's Guide

Manage incoming alerts

1. Select the SNMPV3 Enable check box.
2. Click Credentials.
3. In the SNMP Credentials dialog box:
   1. In the User Name box, enter the login ID of the user who manages the OpenManage Enterprise settings.
   2. From the Authentication Type drop-down menu, select either the SHA or MD_5 algorithm as the authentication type.
   3. In the Authentication Passphrase box, enter the passphrase pertaining to SHA or MD_5 based on your selection.
   4. From the Privacy Type drop-down menu, select either DES or AES_128 as your encryption standard.
   5. In the Privacy Passphrase box, enter the passphrase based on your privacy type.
   6. Click Save.
4. In the Community box, enter the community string to receive the SNMP traps.
5. By default, the SNMP port number for the incoming traps is 161. Edit to change the port number.
6. Click Apply.
   The SNMP credentials and settings are saved.
7. To reset the settings to default attributes, click Discard.

   NOTE: If SNMPv3 alert settings are configured before upgrading to OpenManage Enterprise version 3.1, you have to reconfigure the settings by providing the username, authentication passphrase, and privacy passphrase to continue receiving the alerts.