OpenManage Enterprise 3.10 RESTful API Guide

PDF

POST method for submitting test metric report

This method submits test metric reports.

Description

Submits test metric reports.

Privilege

APPLIANCE_SETUP

HTTP response codes

200

Example request body

{
"GeneratedMetricReportValues": [
{
"MetricDefinition": {"@odata.id": "/redfish/v1/TelemetryService/MetricDefinitions/something"},
"MetricId": "Health",
"MetricProperty": "/redfish/v1/Chassis/System.Embedded.1/Thermal/InletTemp",
"MetricValue": "OK",
"Timestamp": "2019-05-14T13:18:10.236Z"
}
],
"MetricReportName": "testThermalStatus"
}

Example response body

{
    "@Message.ExtendedInfo": [
        {
            "MessageId": "Base.1.5.Success",
            "MessageArgs": [],
            "RelatedProperties": [],
            "Message": "Successfully Completed Request",
            "Severity": "OK",
            "Resolution": "None"
        },
        {
            "MessageId": "IDRAC.2.1.SYS413",
            "MessageArgs": [],
            "RelatedProperties": [],
            "Message": "The operation successfully completed.",
            "Severity": "Informational",
            "Resolution": "No response action is required."
        }
    ]
}

Table 1. AttributesThis table lists the attributes that this method supports.
Attribute name	Description
MetricReportName	Name of the test metric report
GeneratedMetricReportValues	A list of metric report values
MetricDefinition	Definition of the metric values