Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omconfig Chassis Info Or Omconfig Mainsystem Info

Use the omconfig chassis info or omconfig mainsystem info command to enter an asset tag name and a chassis name for the system. For a blade systems, enter asset tag names for modular components as well. The following table displays the valid parameters for the command:

Table 1. Valid Parameters Of Omconfig Chassis Info Or Omconfig Mainsystem Info . This table lists the Valid Parameters Of Omconfig Chassis Info Or Omconfig Mainsystem Info
name=value pair Description
index=< n> Number of the chassis whose asset tag or name you are setting.
tag=< text>

Asset tag in the form of alphanumeric text. Letters or numbers should not exceed 10 characters.

  • NOTE: The parameter is not supported on 13G and later systems. For setting the asset tag, use omconfig chassis biossetup attribute=assetag seting=<value>.
name=< text> Name of the chassis.
In the following example, the asset tag for the main system chassis is being set to buildsys:
omconfig chassis info index=0 tag=buildsys
or
omconfig mainsystem info index=0 tag=buildsys
Index 0 always defaults to the main system chassis. The following command omits index=n, but accomplishes the same:
omconfig chassis info tag=buildsys
or
omconfig mainsystem info tag=buildsys
An acceptable command, when executed, results in the following message:
Chassis info set successfully.
For some chassis, you can assign a different name. You cannot rename the main system chassis. In the following example, the command renames chassis 2 from storscsi1 to storscsia:
omconfig chassis info index=2 name=storscsia
or
omconfig mainsystem info index=2 name=storscsia

As with other commands, the CLI issues an error message if you do not have a chassis 2 (the main chassis=0). The CLI allows you to issue commands only for the system configuration you have.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\