Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omconfig Export Reliability Log

Table 1. omconfig Export Reliability Log . The following table describes the syntax and sample syntaxes for the omconfig Export Reliability Log command.

Description

Exports log on a physical disk or the NVMe adapter. The reliability log for the device PCIe SSD device or NVMe device is exported to the Windows folder on systems running Windows, and to ​ /var/log directory on systems running Linux.

Syntax

omconfig storage pdisk action=exportlog controller=id pdisk=< PDISKID> filename=<filename> , where id is the controller ID . The <PDISKID> variable specifies the physical disk.

  • NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.
  • NOTE: The <filename> is optional. If <filename> is not present, a default filename is assigned.
  • NOTE: Depending on the PCIe SSD or NVMe device the log file name will be PCIeSSD_<device name>_<timestamp>.log or NVMe_<device name>_<timestamp>.log where the <device name> is the name of the device and timestamp is month, day, hour, minute and second during which the command is executed.

Example to

Export log on physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.

Example for SAS controllers

omconfig storage pdisk action=exportlog controller=1 pdisk=0:2:3


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\