Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omreport storage commands

The omreport command allows you to view storage component information for disks, controllers, enclosures, batteries, global storage properties, connectors and cachecades that are part of the storage system. The omreport command helps to get reports with the level of detail that you want.

The commands may vary in, whether they define the fields that appear in the results of a particular omreport command. Fields are defined only if they have a special or less familiar use.

The following sections provide the omreport command syntax required to display the information of various storage components.

To see a list of valid commands for omreport storage, type:
omreport storage -?

The following table provides the omreport storage command syntax.

Table 1. omreport Storage Help . The following table provides the omreport storage command syntax in the order of command level 1, level 2, level 3, and then the description or use of the command.
Command Level 1 Command Level 2 Command Level 3 Use
omreport storage   Displays a list of storage components for which omreport commands are available.
    pdisk Displays a list of the omreport storage pdisk parameters for displaying physical disk information.
    vdisk Displays a list of omreport storage vdisk parameters for displaying virtual disk information.
    controller Displays a list of the omreport storage controller parameters for displaying controller information.
    enclosure Displays a list of the omreport storage enclosure parameters for displaying enclosure information.
    battery Displays a list of the omreport storage battery parameters for displaying battery information.
    globalinfo Displays a list of the omreport storage globalinfo parameters for displaying global storage property information.
    connector Displays a list of the omreport storage connector parameters for displaying connector information.
    cachecade Displays a list of the omreport storage cachecade parameters for displaying cachecade properties.
    pciessed Displays the properties of the PCIe SSD subsystem.
    nvmeadapter Displays the list of NVMe adapters.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\