Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omreport System Events Type Or Omreport Servermodule Events Type

To view the status for components of a specific type, use the omreport system events type=<component name> or omreport servermodule event type=<component name> command. Type:
omreport system events type=fans
or
omreport servermodule events type=fans

This command displays a summary of each component in the system for which events are generated.

The following table displays the events displayed for various component types.

Table 1. Valid Parameters Of Omreport System Events Type Or Omreport Servermodule Events Type . This table lists the Valid Parameters Of Omreport System Events Type Or Omreport Servermodule Events Type
name=value pair Description
type=accords Reports events for AC power cords
type=battery Reports events for batteries
type=fanenclosures Reports events for fan enclosures
type=fans Reports events for fans
type=intrusion Reports events for chassis intrusion
type=log Reports events for logs
type=memory Reports events for memory
type=powersupplies Reports events for power supplies
type=redundancy Reports events for redundancy
type=systempower Reports events for system power
type=temps Reports events for temperatures
type=removableflashmedia Reports events for removable flash media
type=volts Reports events for voltages
The following is an example output:
Current SNMP Trap Configuration 
                                 -------
                                 System
                                 -------
                                 Settings
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                                 -----------
                                 Fans Group
                                 ----------
                                 Settings
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                                 -----------
                                 Individual Objects
                                 -----------
                                 System Board Fan1 RPM Settings
                                 Index:0
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                                 System Board Fan2 RPM Settings
                                 Index:1
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                              

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\