Dell EMC OpenManage Message Reference Guide Version 9.1

PDF

Voltage Sensor Events

The voltage sensor event messages monitor the number of volts across critical components. These messages provide status and warning information for voltage sensors for a particular chassis.

Table 1. Voltage Sensor Events . The following table provides information about the voltage sensor events
Event Message	Severity	Cause
`<Sensor Name/Location> voltage sensor detected a failure <Reading> where <Sensor Name/Location> is the entity that this sensor is monitoring. Reading is specified in volts. For example, 3.860 V.`	Critical	The voltage of the monitored device has exceeded the critical threshold.
`<Sensor Name/Location> voltage sensor state asserted.`	Critical	The voltage specified by <Sensor Name/Location> is in critical state.
`<Sensor Name/Location> voltage sensor state de-asserted.`	Information	The voltage of a previously reported <Sensor Name/Location> is returned to normal state.
`<Sensor Name/Location> voltage sensor detected a warning <Reading>.`	Warning	Voltage of the monitored entity <Sensor Name/Location> exceeded the warning threshold.
`<Sensor Name/Location> voltage sensor returned to normal <Reading>.`	Information	The voltage of a previously reported <Sensor Name/Location> is returned to normal state.
`The <Sensor Name/Location> voltage is less than the lower warning threshold.`	Warning	Voltage of the monitored Entity <Sensor Name/ Location> exceeded the warning threshold.
`The <Sensor Name/Location> voltage is less than the lower critical threshold.`	Critical	Voltage of the monitored Entity <Sensor Name/ Location> exceeded the critical threshold.
`The <Sensor Name/Location> voltage is greater than the upper warning threshold.`	Warning	Voltage of the monitored Entity <Sensor Name/ Location> exceeded the warning threshold.
`The <Sensor Name/Location> voltage is greater than the upper critical threshold.`	Critical	Voltage of the monitored Entity <Sensor Name/ Location> exceeded the critical threshold.
`The <Sensor Name/Location> voltage is outside of range.`	Critical	Voltage of the monitored Entity <Sensor Name/ Location> is outside of normal operating range.
`The <Sensor Name/Location> voltage is within range.`	Information	Voltage of the monitored Entity <Sensor Name/ Location> returned to a normal operating range.