Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1 PB14250/PB14250 2-in-1 (Intel Core Ultra 200U Series/Intel Core 100U and 200U Series) Owner's Manual

PDF

Removing the WLAN card

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the SIM-card tray, if applicable.
  3. Remove the base cover.

About this task

The following images indicate the location of the WLAN card and provide a visual representation of the removal procedure.
Figure 1. Removing the WLAN card
Removing the WLAN card

Steps

  1. Remove the screw (M2x3) that secures the WLAN-card bracket to the system board.
  2. Lift the WLAN-card bracket off the WLAN card.
  3. Disconnect the WLAN-antenna cables from the connectors on the WLAN card.
  4. Slide and remove the WLAN card from the WLAN-card slot.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\