Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1 PB14250/PB14250 2-in-1 (Intel Core Ultra 200U Series/Intel Core 100U and 200U Series) Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary depending on the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Dell Pro 14 Plus/Dell Pro 14 Plus 2-in-1.
Component	Screw type	Quantity	Screw image
Base cover	M2x8.5 captive screws	6
Base cover	M2x6 captive screws	2
Battery	M2x5 captive screws	4
WWAN-card shielding cover	M2x4	3
SSD-shielding cover	M2x3	3
M.2 2230 solid state drive	M2x4	1
WLAN-card bracket	M2x3	1
Speakers	M1.6x1.5	6
Fan and heat-sink assembly	M2x4	2
Fan and heat-sink assembly	M2x3 captive screws	4
USH board	M1.6x1.5	2
Smart card reader	M2x2	4
System board	M2x3	4
System board	M2x4	For models without WWAN card: 2 For models with WWAN card: 3
Fingerprint-reader bracket	M2x3	1
WLAN-antenna module	M1.6x2.5	4
USB Type-C connector module	M2x5	3
I/O board	M2x3	3
Power button with optional fingerprint reader	M1.6x1.7	2
Display-cable bracket	M2x3	2
Display assembly	M2.5x4	4
Display panel	M1.6x1.4	4
Display hinge cap	M2x3	2
Display hinge cap	M2.5x3.5	4
MIPI camera	M1.6x1.4	2
Display cable for MIPI camera	M1.6x1.4	2
Middle-board cable	M1.6x1.4	2
Keyboard	M1.6x1.7	18
Keyboard bracket	M2x2	2