PowerProtect Data Manager 19.11 Deployment Guide

PowerProtect Data Manager uses an internal private Docker network. If the PowerProtect Data Manager server is deployed in the same private network as the internal Docker network, or if some data sources have already been deployed within the private network, PowerProtect Data Manager fails to protect the data sources.

To resolve this issue, deploy the PowerProtect Data Manager server and other data sources in a different network. If you cannot modify the deployed network, run a script tool within PowerProtect Data Manager to switch the private Docker network to a different network.

To switch the private Docker network to a different network:

1. Connect to the PowerProtect Data Manager console and change to the root user.
2. Modify the Docker network by running the following command:

   /usr/local/brs/puppet/scripts/docker_network_switch.sh subnet gateway

   Where:

   • subnet describes the new network in the format 172.25.0.0/24
   • gateway is the gateway for the private network. For example: 172.25.0.1

     Ensure that you specify a subnet and gateway that is not in use.