iDRAC Error and Event Messages Reference Guide
AMP—Amperage Event Messages
AMP0300
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system board arg1 current is less than the lower warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0301
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system board arg1 current is less than the lower critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- System board <name> current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0302
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system board arg1 current is greater than the upper warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- LCD Message
- The system board <name> current is outside of range.
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0303
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system board arg1 current is greater than the upper critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- System board <name> current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0304
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system board arg1 current is outside of range.
- Arguments
- arg1 = name
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- System board <name> current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0305
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The system board arg1 current is within range.
- Arguments
- arg1 = name
- Detailed Description
- No detailed description available.
- Recommended Response Action
- No response action is required.
- Category
- System Health (AMP = Amperage)
- Severity
- Informational
- Trap/EventID
- 2179
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0306
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disk drive bay arg1 current is less than the lower warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0307
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disk drive bay arg1 current is less than the lower critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- Disk drive bay <name> current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0308
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disk drive bay arg1 current is greater than the upper warning threshold.
- Arguments
- arg1 = name
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0309
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disk drive bay arg1 current is greater than the upper critical threshold.
- Arguments
- arg1 = name
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- Disk drive bay <name> current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0310
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disk drive bay arg1 current is outside of range.
- Arguments
- arg1 = name
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- Disk drive bay <name> current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0311
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disk drive bay arg1 current is within range.
- Arguments
- arg1 = name
- Detailed Description
- No detailed description available.
- Recommended Response Action
- No response action is required.
- Category
- System Health (AMP = Amperage)
- Severity
- Informational
- Trap/EventID
- 2179
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0312
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- System level current is less than the lower warning threshold.
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Not Applicable
AMP0313
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- System level current is less than the lower critical threshold.
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- System level current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Not Applicable
AMP0314
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- System level current is greater than the upper warning threshold.
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Not Applicable
AMP0315
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- System level current is greater than the upper critical threshold.
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- System level current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Not Applicable
AMP0316
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- System level current is outside of range.
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- LCD Message
- System level current is outside of range. Contact Support
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log, Power Off, Power Cycle, Reset
- Applicable Event or Alert Types
- CMC—Not Applicable
AMP0317
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- System level current is within range.
- Detailed Description
- No detailed description available.
- Recommended Response Action
- No response action is required.
- Category
- System Health (AMP = Amperage)
- Severity
- Informational
- Trap/EventID
- 2179
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
AMP0318
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Chassis power level current is less than the lower warning threshold.
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0319
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Chassis power level current is less than the lower critical threshold.
- Detailed Description
- No detailed description available.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0320
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Chassis power level current is greater than the upper warning threshold.
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Warning
- Trap/EventID
- 2178
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0321
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Chassis power level current is greater than the upper critical threshold.
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0322
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Chassis power level current is outside of range.
- Detailed Description
- Product documentation contains information on correct configuration. The failure could also be caused by a faulty component or related cabling. System performance may be degraded.
- Recommended Response Action
- Review system power policy, check system logs for power related failures, and review system configuration changes.
- Category
- System Health (AMP = Amperage)
- Severity
- Critical
- Trap/EventID
- 2177
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
AMP0323
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Chassis power level current is within range.
- Detailed Description
- No detailed description available.
- Recommended Response Action
- No response action is required.
- Category
- System Health (AMP = Amperage)
- Severity
- Informational
- Trap/EventID
- 2179
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, Chassis Event Proxy*
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\