OS10 Enterprise Edition User Guide Release 10.4.1.0

PDF

show dot1x interface

Displays 802.1X configuration information.

Syntax
show dot1x interface ethernet node/slot/port[:subport]
Parameters
ethernet node/slot/port[:subport] — Enter the Ethernet interface information.
Command Mode
EXEC
Usage Information
Use this command to view the dot1x interface configuration for a specific interface.
Example
OS10# show dot1x interface
                                       802.1x information on ethernet1/1/1
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       802.1x information on ethernet1/1/2
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       802.1x information on ethernet1/1/3
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       802.1x information on ethernet1/1/4
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       802.1x information on ethernet1/1/5
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       802.1x information on ethernet1/1/6
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       802.1x information on ethernet1/1/7
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       Port Control:             AUTO
                                       Port Auth Status:         UNAUTHORIZED
                                       --more--
                                       
                                    
Example (when dot1x is not enabled globally)
OS10# show dot1x interface
                                       802.1x not enabled in the system
                                       OS10#
                                       
                                    
Example (Ethernet)
OS10# show dot1x interface ethernet 1/1/7
                                       802.1x information on ethernet1/1/7
                                       -------------------------------------
                                       Dot1x Status:             Enable
                                       Port Control:             AUTO
                                       Re-Authentication:        Enable
                                       Tx Period:                120 seconds
                                       Quiet Period:             120 seconds
                                       Supplicant Timeout:       45 seconds
                                       Server Timeout:           60 seconds
                                       Re-Auth Interval:         3600 seconds
                                       Max-EAP-Req:              4
                                       Host Mode:                MULTI_AUTH
                                       Port status and State info for Supplicant: 01:80:c2:00:01:1c
                                       Port Auth Status:         UNAUTHORIZED
                                       Untagged VLAN id:         1
                                       Auth PAE State:           Initialize
                                       Backend State:            Idle
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\