OS10 Enterprise Edition User Guide Release


show ip bgp dampened-paths

Displays BGP routes that are dampened (non-active).

show ip bgp [vrf vrf-name] dampened-paths
Not configured
Command Mode
Usage Information
  • vrf vrf-name — (OPTIONAL) Enter the keywords vrf and then the name of the VRF to view routes that are affected by a specific community list corresponding to that VRF.
  • Network — Displays the network ID to which the route is dampened.
  • From — Displays the IP address of the neighbor advertising the dampened route.
  • Reuse — Displays the HH:MM:SS until the dampened route is available.
  • Path — Lists all AS the dampened route passed through to reach the destination network.
OS10# show ip bgp dampened-paths
                                       BGP local router ID is
                                       Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
                                       Origin codes: i - IGP, e - EGP, ? - incomplete
                                       Network        From           Reuse          Path           
                                       d*       00:00:12       800 9 8 i
                                       d*       00:00:12       800 9 8 i
                                       d*       00:00:12       800 9 8 i
                                       d*       00:00:12       800 9 8 i
                                       d*       00:00:12       800 9 8 i
                                       Total number of prefixes: 5
Supported Releases
10.3.0E or later

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\