OS10 Enterprise Edition User Guide Release 10.4.1.0

PDF

show ip ospf statistics

Displays OSPF traffic statistics.

Syntax
  • show ip ospf [ instance-number] statistics [interface interface]
Parameters
  • instance-number — (Optional) Enter an OSPF instance number (1 to 65535).
  • interface interface — (Optional) Enter the interface information:
    • ethernet node/slot/port[:subport] — Enter an Ethernet port interface.
    • port-channel number — Enter the port-channel interface number (1 to 128).
    • vlan vlan-id — Enter the VLAN ID number (1 to 4093).
Default
Not configured
Command Mode
EXEC
Usage Information
This command displays OSPFv2 traffic statistics for a specified instance or interface, or for all OSPFv2 instances and interfaces.
Example
OS10# show ip ospf 10 statistics 
                                       Interface vlan3050
                                       Receive Statistics
                                       rx-invalid          0    rx-invalid-bytes     0 
                                       rx-hello            0    rx-hello-bytes       0
                                       rx-db-des           0    rx-db-des-bytes      0
                                       rx-ls-req           0    rx-ls-req-bytes      0
                                       rx-ls-upd           0    rx-ls-upd-bytes      0
                                       rx-ls-ack           0    rx-ls-ack-bytes      0   
                                       Transmit Statistics
                                       tx-failed           0    tx-failed-bytes      0
                                       tx-hello            0    tx-hello-bytes       0
                                       tx-db-des           0    tx-db-des-bytes      0
                                       tx-ls-req           0    tx-ls-req-bytes      0
                                       tx-ls-upd           0    tx-ls-upd-bytes      0
                                       tx-ls-ack           0    tx-ls-ack-bytes      0
                                       Error packets (Receive statistics)
                                       bad-src             0   dupe-id               0   hello-err           0
                                       mtu-mismatch        0   nbr-ignored           0   wrong-proto         0
                                       resource-err        0   bad-lsa-len           0   lsa-bad-type        0
                                       lsa-bad-len         0   lsa-bad-cksum         0   auth-fail           0
                                       netmask-mismatch    0   hello-tmr-mismatch    0   dead-ivl-mismatch   0
                                       options-mismatch    0   nbr-admin-down        0   own-hello-drop      0
                                       self-orig             0   wrong-length        0   checksum-error      0   
                                       version-mismatch      0   area-mismatch       0           
                                       
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\