OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

redistribute

Redistributes information from another routing protocol or routing instance to the OSPFv3 process.

Syntax
redistribute {bgp as-number | connected | static} [route-map route-map name ]
Parameters
  • as-number — Enter an autonomous number to redistribute BGP routing information throughout the OSPFv3 instance (1 to 4294967295).
  • route-map name — Enter the name of a configured route-map.
  • connected — Enter the information from connected (active) routes on interfaces to redistribute.
  • static — Enter the information from static routes on interfaces redistribute.
Defaults
Not configured
Command Mode
ROUTER-OSPFv3
Usage Information
When an OSPFv3 redistributes, the process is not completely removed from the BGP configuration. The no version of this command disables the redistribute configuration.
Example
OS10(config)# router ospfv3 100
                                       OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1
                                    
Example (Connected)
OS10((config-router-ospfv3-100)# redistribute connected route-map dell2
Supported Releases
10.3.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\