OS10 Enterprise Edition User Guide Release 10.4.0E(R3)


show ip bgp peer-group

Displays information on BGP peers in a peer-group.

show ip bgp peer-group peer-group-name
peer-group-name — (Optional) Enter the peer group name to view information about that peer-group only.
Not configured
Command Mode
Usage Information
  • Peer-group — Displays the peer group name. Minimum time displays the time interval between BGP advertisements.
  • Administratively shut — Displays the peer group’s status if you do not enable the peer group. If you enable the peer group, this line does not display.
  • BGP version — Displays the BGP version supported.
  • For address family — Displays IPv4 unicast as the address family.
  • BGP neighbor — Displays the name of the BGP neighbor.
  • Number of peers — Displays the number of peers currently configured for this peer group.
  • Peer-group members — Lists the IP addresses of the peers in the peer group. If the address is outbound optimized, an * displays next to the IP address.
OS10# show ip bgp peer-group bgppg 
                                       Peer-group bgppg, remote AS 103 
                                       BGP version 4 
                                       Minimum time between advertisement runs is 30 seconds  
                                       For address family: Unicast 
                                       BGP neighbor is bgppg, peer-group external 
                                       Update packing has 4_OCTET_AS support enabled 
Example (Summary)
OS10# show ip bgp peer-group ebgp summary
                                       BGP router identifier  local AS number 6
                                       Neighbor      AS   MsgRcvd   MsgSent   Up/Down   State/Pfx
                                   7    7         6         00:01:54  5  
Supported Releases
10.2.0E or later

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\