OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show ip ospf database opaque-link

Displays information about the opaque-link (Type 9) LSA.

Syntax
show ip ospf [ process-id] database opaque-link
Parameters
process-id — (Optional) Displays the opaque-link (Type 9) LSA information for an OSPF Process ID. If you do not enter a Process ID, this command applies only to the first OSPF process.
Default
Not configured
Command Mode
EXEC
Usage Information
  • LS Age — Displays the LS age.
  • Options — Displays the optional capabilities available on the router.
  • LS Type — Displays the Link State type.
  • Link State ID — Identifies the router ID.
  • Advertising Router — Identifies the advertising router’s ID.
  • LS Seq Number — Identifies the LS sequence number (identifies old or duplicate LSAs).
  • Checksum — Displays the Fletcher checksum of an LSA’s complete contents.
  • Length — Displays the LSA length in bytes.
  • Opaque Type — Identifies the Opaque type field (the first 8 bits of the LS ID).
  • Opaque ID — Identifies the Opaque type-specific ID (the remaining 24 bits of the LS ID).
Example
OS10# show ip ospf 100 database opaque-link
                                       OSPF Router with ID (1.1.1.1) (Process ID 100)
                                       
                                       Type-9 Link Local Opaque (Area 0.0.0.1)
                                       
                                       LS age: 3600
                                       Options: (No TOS-Capability, No DC)
                                       LS type: Type-9 Link Local Opaque
                                       Link State ID: 8.1.1.1
                                       Advertising Router: 2.2.2.2
                                       LS Seq Number: 0x80000007
                                       Checksum: 0x9DA1
                                       Length: 28
                                       Opaque Type: 8
                                       Opaque ID: 65793
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\