OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show ip ospf database router

Displays information about the router (Type 1) LSA.

Syntax
show ip ospf process-id database router
Parameters
process-id — (Optional) Displays the router (Type 1) LSA for an OSPF Process ID. If you do not enter a Process ID, this command applies only to the first OSPF process.
Default
Not configured
Command Mode
EXEC
Usage Information
Output:
  • LS age —Displays the LS age.
  • Options—Displays optional capabilities.
  • LS Type —Displays the Link State type.
  • Link State ID —Identifies the router ID.
  • Advertising Router —Identifies the advertising router’s ID.
  • LS Seq Number—Identifies the LS sequence number (identifies old or duplicate LSAs).
  • Checksum—Displays the Fletcher checksum of an LSA’s complete contents.
  • Length—Displays the LSA length in bytes.
  • TOS—Displays the ToS options. The only option available is zero..
  • Metric—Displays the LSA metric.
Example
OS10# show ip ospf 10 database router
                                       
                                       OSPF Router with ID (111.2.1.1) (Process ID 10)
                                       
                                       Router (Area 0.0.0.0)
                                       
                                       LS age: 1419
                                       Options: (No TOS-capability, No DC, E)
                                       LS type: Router
                                       Link State ID: 111.2.1.1
                                       Advertising Router: 111.2.1.1
                                       LS Seq Number: 0x8000000d
                                       Checksum: 0x9bf2
                                       Length: 60
                                       AS Boundary Router
                                       Number of Links: 3
                                       
                                       Link connected to: a Transit Network
                                       (Link ID) Designated Router address: 110.1.1.2
                                       (Link Data) Router Interface address: 110.1.1.1
                                       Number of TOS metric: 0
                                       TOS 0 Metric: 1
                                       
                                       Link connected to: a Transit Network
                                       (Link ID) Designated Router address: 111.1.1.1
                                       (Link Data) Router Interface address: 111.1.1.1
                                       Number of TOS metric: 0
                                       TOS 0 Metric: 1
                                       
                                       Link connected to: a Transit Network
                                       (Link ID) Designated Router address: 111.2.1.1
                                       (Link Data) Router Interface address: 111.2.1.1
                                       Number of TOS metric: 0
                                       TOS 0 Metric: 1
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\