OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show ip ospf

Displays OSPF instance configuration information.

Syntax
show ip ospf [ instance-number]
Parameters
instance-number — View OSPF information for a specified instance number (1 to 65535)
Default
Not configured
Command Mode
EXEC
Usage Information
None
Example
OS10# show ip ospf 10
                                       Routing Process ospf 10 with ID 111.2.1.1
                                       Supports only single TOS (TOS0) routes
                                       It is an Autonomous System Boundary Router
                                       It is Flooding according to RFC 2328
                                       Convergence Level 0
                                       Min LSA origination 0 msec, Min LSA arrival 1000 msec
                                       Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
                                       Number of area in this router is 1, normal 1 stub 0 nssa 0
                                       Area (0.0.0.0)
                                       Number of interface in this area is 3
                                       SPF algorithm executed 38 times
                                       Area ranges are
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\