OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show ipv6 route

Displays IPv6 routes.

Syntax
show ipv6 route [all | bgp | connected | static | A::B/mask | summary]
Parameters
  • all—(Optional) Displays all routes including nonactive routes.
  • bgp—(Optional) Displays BGP route information.
  • connected—(Optional) Displays only the directly connected routes.
  • static—(Optional) Displays all static routes.
  • A::B/mask —(Optional) Enter the IPv6 destination address and mask.
  • summary—(Optional) Displays the IPv6 route summary.
Default
Not configured
Command Mode
EXEC
Usage Information
None
Example (All)
OS10# show ipv6 route all
                                       Codes: C - connected
                                       S - static
                                       B - BGP, IN - internal BGP, EX - external BGP
                                       O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
                                       N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
                                       E2 - OSPF external type 2, > - non-active route
                                       Gateway of last resort is not set
                                       Destination     Gateway        Dist/Metric     Last Change
                                       ---------------------------------------------------------
                                    
Example (Connected)
OS10# show ipv6 route connected
                                       Codes: C - connected
                                       S - static
                                       B - BGP, IN - internal BGP, EX - external BGP
                                       O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
                                       N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
                                       E2 - OSPF external type 2, > - non-active route
                                       Gateway of last resort is not set
                                       Destination         Gateway            Dist/Metric      Last Change
                                       ------------------------------------------------------------------
                                       C    2001:db86::/32 via 2001:db86:fff::1 ethernet1/1/1  0/0 00:03:24
                                       
                                    
Example (Summary)
OS10# show ipv6 route summary
                                       Route Source        Active Routes  Non-Active Routes
                                       Ospf                0              0
                                       Bgp                 0              0
                                       Connected           0              0
                                       Static              0              0
                                       Ospf Inter-area     0              0
                                       NSSA External-1     0              0
                                       NSSA External-2     0              0
                                       Ospf External-1     0              0
                                       Ospf External-2     0              0
                                       Bgp Internal        0              0
                                       Bgp External        0              0
                                       Ospf Intra-area     0              0
                                       Total               0              0
                                       
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\