OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show lacp interface

Displays information about specific LACP interfaces.

Syntax
show lacp interface ethernet node/slot/port
Parameters
node/slot/port — Enter the interface information.
Default
Not configured
Command Mode
EXEC
Usage Information
The LACP_activity field displays if you configure the link in Active or Passive port-channel mode. The Port Identifier field displays the port priority as part of the information including the port number. For example, Port Identifier=0x8000,0x101, where the port priority value is 0x8000 and the port number value is 0x101.
Example
OS10# show lacp interface ethernet 1/1/129
                                       Invalid Port id, Max. Port Id is: 32
                                       OS10# show lacp interface ethernet 1/1/29
                                       
                                       Interface ethernet1/1/29 is up
                                       Channel group is 1 port-channel is po1
                                       PDUS sent: 365
                                       PDUS rcvd: 17
                                       Marker sent: 0
                                       Marker rcvd: 0
                                       Marker response sent: 0
                                       Marker response rcvd: 0
                                       Unknown packetse rcvd: 0
                                       Illegal packetse rcvd: 0
                                       Local Port: ethernet1/1/29    MAC Address=90:b1:1c:f4:9b:8a
                                       System Identifier=32768,32768
                                       Port Identifier=32768,32768
                                       Operational key=1
                                       LACP_Activity=passive
                                       LACP_Timeout=Long Timeout(30s)
                                       Synchronization=IN_SYNC
                                       Collecting=true
                                       Distributing=true
                                       Partner information refresh timeout=Long Timeout(90s)
                                       Actor Admin State=BCFHJKNO
                                       Actor Oper State=BDEGIKNO
                                       Neighbor: 178
                                       MAC Address=00:00:00:00:00:00
                                       System Identifier=,00:00:00:00:00:00
                                       Port Identifier=0,00:01:e8:8a:fd:9e
                                       Operational key=1
                                       LACP_Activity=passive
                                       LACP_Timeout=Long Timeout(30s)
                                       Synchronization=IN_SYNC
                                       Collecting=true
                                       Distributing=true
                                       Partner Admin State=BCEGIKNP
                                       Partner Oper State=BDEGIKMO 
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\