OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show lacp system-identifier

Displays the LACP system identifier for a device.

Syntax
show lacp system-identifier
Parameters
None
Default
Not configured
Command Mode
EXEC
Usage Information
The LACP system ID is a combination of the configurable LACP system priority value and the MAC address. Each system that runs LACP has an LACP system priority value. The default value is 32768 or configure a value between 1 and 65535. LACP uses the system priority with the MAC address to form the system ID and uses the system priority during negotiation with other devices. A higher system priority value means a lower priority. The system ID is different for each device.
Example
OS10# show lacp system-identifier 
                                       
                                       Actor System ID: Priority 32768, Address 90:b1:1c:f4:9b:8a 
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\