OS10 Enterprise Edition User Guide Release 10.4.0E(R3)

PDF

show mac address-table

Displays information about the MAC address table.

Syntax
show mac address-table [address mac-address | aging-time | [count [vlan vlan-id] | dynamic | interface { ethernet node/slot/port[:subport] | port-channel number}]| static [address mac-address] | vlan vlan-id
Parameters
  • address mac-address — (Optional) Displays MAC address table information.
  • aging-time — (Optional) Displays MAC address table aging-time information.
  • count — (Optional) Displays the number of dynamic and static MAC address entries.
  • dynamic — (Optional) Displays dynamic MAC address table entries only.
  • interface — Set the interface type:
    • ethernet node/slot/port[:subport] — Displays MAC address table information for a physical interface.
    • port-channel channel-number — Displays MAC address table information for a port-channel interface (1 to 128).
  • static — (Optional) Displays static MAC address table entries only.
  • vlan vlan-id — (Optional) Displays VLAN information only (1 to 4093).
Default
Not configured
Command Mode
EXEC
Usage Information
The network device maintains static MAC address entries saved in the startup configuration file, and reboots and flushes dynamic entries.
Example (Address)
OS10# show mac address-table address 90:b1:1c:f4:a6:8f       
                                       VlanId  Mac Address             Type           Interface
                                       1       90:b1:1c:f4:a6:8f       dynamic         ethernet1/1/3
                                       
                                    
Example (Aging Time)
OS10# show mac address-table aging-time
                                       Global Mac-address-table aging time : 1800
                                       
                                    
Example (Count)
OS10# show mac address-table count
                                       MAC Entries for all vlans :
                                       Dynamic Address Count : 5
                                       Static Address (User-defined) Count : 0
                                       Total MAC Addresses in Use: 5
                                    
Example (Dynamic)
OS10# show mac address-table dynamic
                                       VlanId  Mac Address          Type     Interface
                                       1       90:b1:1c:f4:a6:8f    dynamic  ethernet1/1/3
                                       
                                    
Example (Ethernet)
OS10# show mac address-table interface ethernet 1/1/3
                                       VlanId  Mac Address         Type     Interface
                                       1       66:38:3a:62:31:3a   dynamic  ethernet1/1/3
                                       
                                    
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\