Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

PDF

radius-server group

Creates or deletes a group of radius servers.

Syntax
radius-server group group-name
Parameters
group-name
Enter the group name that denotes the group of RADIUS servers.
Defaults
Not configured.
Command Modes
CONFIGURATION
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S3148.
9.10(0.0)
Introduced on the S6100-ON.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.4.(0.0)
Introduced on the S-Series and Z-Series.
Example
DellEMC(conf)# radius-server group group1 
DellEMC(conf-radius-group)# radius-server host 1.1.1.1 key secret 
DellEMC(conf-radius-group)# radius-server host 2.2.2.2 key secret 
DellEMC(conf-radius-group)# radius-server vrf vrf1 source-interface tengigabitethernet 1/36 
DellEMC(conf-radius-group)# show config 
! 
radius-server group group1
radius-server vrf vrf1 source-interface TenGigabitEthernet 1/36 
radius-server host 1.1.1.1 key 7 9a2f3ec0c65c6f41  
radius-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41 
DellEMC(conf-radius-group)#
Related Commands

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\