Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

PDF

snmp-server group

Configure a new SNMP group or a table that maps SNMP users to SNMP views.

Syntax
snmp-server group [group_name {1 | 2c | 3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]]

To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] command.

Parameters
group_name
Enter a text string (up to 20 characters long) as the name of the group. The following groups are created for mapping to read/write community/security-names (defaults):
  • v1v2creadg — maps to a community/security-name with ro permissions.
  • 1v2cwriteg — maps to a community/security-name rw permissions.
1 | 2c | 3
(OPTIONAL) Enter the security model version number (1, 2c, or 3):
  • 1 is the least secure version.
  • 3 is the most secure of the security modes.
  • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed.

The default is 1.

auth
(OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption.
noauth
(OPTIONAL) Enter the keyword noauth to specify no authentication of a packet.
priv
(OPTIONAL) Enter the keyword priv to specify both authentication and then scrambling of the packet.
read name
(OPTIONAL) Enter the keyword read then a name (a string of up to 20 characters long) as the read view name. The default is GlobalView and is assumed to be every object belonging to the internet (1.3.6.1) OID space.
write name
(OPTIONAL) Enter the keyword write then a name (a string of up to 20 characters long) as the write view name.
notify name
(OPTIONAL) Enter the keyword notify then a name (a string of up to 20 characters long) as the notify view name.
access access-list-name
(Optional) Enter the standard IPv4 access list name (a string up to 16 characters long).
ipv6 access-list-name
(Optional) Enter the keyword ipv6 then the IPv6 access list name (a string up to 16 characters long).
access-list-name ipv6 access-list-name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults
As above.
Command Modes
CONFIGURATION
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S3148.
9.10(0.0)
Introduced on the S6100–ON.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.10.2
Added support for the access parameter.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
E-Series legacy command
Usage Information
The following example specifies the group named harig as a version 3 user requiring both authentication and encryption and read access limited to the read named rview.
NOTE: The number of configurable groups is limited to 16 groups.
Example
DellEMC# conf
DellEMC(conf)# snmp-server group harig 3 priv read rview
DellEMC#
Related Commands
  • show snmp group — displays the group name, security model, view status, and storage type of each group.
  • show running-config — displays the SNMP running configuration.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\