Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Command Line Reference Guide for the S4048–ON System 9.14.2.4

PDF

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.

Syntax
spanning-tree msti instance {cost cost | priority priority}
Parameters
msti instance
Enter the keyword msti and the MST instance number. The range is from zero (0) to 63.
cost cost
(OPTIONAL) Enter the keyword cost then the port cost value. The range is from 1 to 200000. The defaults are:
  • 100 Mb/s Ethernet interface = 200000
  • 1-Gigabit Ethernet interface = 20000
  • 10-Gigabit Ethernet interface = 2000
  • Port Channel interface with one 100 Mb/s Ethernet = 200000
  • Port Channel interface with one 1 Gigabit Ethernet = 20000
  • Port Channel interface with one 10 Gigabit Ethernet = 2000
  • Port Channel with two 1 Gigabit Ethernet = 18000
  • Port Channel with two 10 Gigabit Ethernet = 1800
  • Port Channel with two 100 Mbps Ethernet = 180000
priority priority
Enter keyword priority then a value in increments of 16 as the priority. The range is from 0 to 240. The default is 128.
Defaults
  • cost = depends on the interface type
  • priority = 128
Command Modes
INTERFACE
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S3148.
9.10(0.0)
Introduced on the S6100–ON.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.5.1.0
Introduced on the E-Series.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\