Dell Command Line Reference Guide for the S4048–ON System 9.14.2.5

PDF

redistribute

Redistribute into OSPFv3.

Syntax
redistribute {bgp as number}{connected | static}[metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value]

To disable redistribution, use the no redistribute {connected | static} command.

Parameters
bgp as number

Enter the keyword bgp then the autonomous system number.

The range is from 1 to 65535.

connected

Enter the keyword connected to redistribute routes from physically connected interfaces.

static

Enter the keyword static to redistribute manually configured routes.

metric metric-value

Enter the keyword metric then the metric value.

The range is from 0 to 16777214.

The default is 20.

metric-type type-value

(OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type of 1 or 2 for default routes. The values are:

  • 1 for a type 1 external route
  • 2 for a type 2 external route

The default is 2.

route-map map-name

(OPTIONAL) Enter the keywords route-map then the name of an established route map. If the route map is not configured, the default is deny (to drop all routes).

tag tag-value

(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPFv3.

The range is from 0 to 4294967295

The default is 0.

Defaults
Not configured.
Command Modes

ROUTER OSPF for OSPFv2

ROUTER OSPFv3 for OSPFv3
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S3148.
9.10(0.0)
Introduced on the S6100-ON.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(1.0)
Introduced on the Z9500.
9.1.(0.0)
Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0
Introduced on the S4820T.
7.8.1.0
Added support for the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage Information

To redistribute the default route (x:x:x:x::x), use the default-information originate command.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\