Dell Command Line Reference Guide for the S4048–ON System 9.14.2.5

PDF

session-key

Specify the session keys used in the crypto policy entry.

Syntax
session-key {inbound | outbound} {ah spi hex-key-string | esp spi encrypt hex-key-string auth hex-key-string

To delete the session key information from the crypto policy, use the no session-key {inbound | outbound} {ah | esp} command.

Parameters
name
Enter the name for the transform set.
inbound
Specify the inbound session key for IPSec.
outbound
Specify the outbound session key for IPSec.
ah
Use the AH protocol when you select the AH transform set in the crypto policy.
esp
Use the ESP protocol when you select the ESP transform set in the crypto policy.
spi
Enter the security parameter index number.
hex-key-string
Enter the session key in hex format (a string of 8, 16, or 20 bytes). For DES algorithms, specify at least 16 bytes per key. For SHA algorithms, specify at least 20 bytes per key.
encrypt
Indicates the ESP encryption transform set key string.
auth
Indicates the ESP authentication transform set key string.
Defaults
None
Command Modes
CONF-CRYPTO-POLICY
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(0.2)
Introduced on the Z9000, S4810, and S4820T.
9.2(1.0)
Introduced on the Z9500.
Usage Information
  • This command is only available in the ipsec-manual model.
  • The key information entry is associated with the global method for enabling clear text or encrypted display in the running config.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\